koi finance
Home Improvement
Trending

HOW TO OPEN THE DOOR IF THE KEY IS BROKEN IN THE LOCK

First of all, you need to pay attention to where the object broke. If the fragment remains vertical or horizontal, it is easy to pull it out. However, if you manage to turn it, the issue is worse: the grits can additionally be wrapped around the core of the lock, forming a highly tight attachment of the fragment and the larva. But even if it broke so well, you can avoid installing a new locking mechanism.

Remove the key from the lock

If the fragment is held relatively loosely, it may be sufficient to lift it with your fingers to extract it.

If the locking mechanism is of the highest quality, you should use the available means:

First, the jigsaw blade is pushed under the key in the locking roller and rotated gently so that the blade teeth are on top. Then they pick up the stuck piece with their teeth and take it out.

SPECIAL METHODS

The methods mentioned are suitable for the most common crossbar locks.

Having received the lever, it rotates, pushed out without much effort.

  • Installing a door block in an opening is inconvenient and costly, so it is worth avoiding such an extreme solution.  But the door and the door will remain in relative integrity.

Our life is full of strange cases, but it is one thing when such a case causes laughter and fun in everyone and much more when it turns into serious difficulties. By reopening the front or garage door, you may find yourself in a situation where one part of the key remains in the lock, and the other is in your hands. Usually, as luck would have it, you hurry somewhere, hoping to jump home or in the garage as soon as possible, get something to run down, but a careless move turns out to make no sense in the running.

You do not need to push the piece left in your hand into the keyhole, driving the broken part even more profound. It is better to use expert tips on removing the broken key from the lock, which we presented in this article.

WHY DOES THE KEY BREAK WHEN OPENING THE LOCK?

Before looking at specific tips for extracting key pieces from a lock, let’s determine why such a key is broken. There are several reasons for this. First, let’s define their dissertation.

Lock selectors kindly shared some secrets on removing the key fragment from the lock with the least risk of damaging the key. And we will certainly share this information, but first, I would like to talk about how it is unnecessary to act when extracting a stuck key.

MYTHS ABOUT HOW TO EASILY REMOVE A KEY FROM A LOCK

You can find many informative articles on the internet that talk about controversial simple ways to recover a key fragment from the lock. But, unfortunately, everything is not so simple, because in most cases, the key does not just stick to the mechanism but locks it there. In addition, it often locks tightly, and it is not possible to remove it with the help of adhesive, as suggested by the authors of some articles.

Experts are evaluating the method of extracting a part of the key using adhesive glue laugh because this, if I may say “method,” can not withstand criticism. And secondly, most likely, a bit of glue, which you will push on the lock, will soil the inner walls of its well. And the second part of the key will stick securely to them.

The choice with glue is also wrong because incorrect handling can lead to the entry of chemicals into the secret mechanism of the lock, which will inevitably lead to its breakdown. Then you should look for a way to clean the locking mechanism from overgrowth, but why do you need all this? There is also a mythical suggestion in some forums to extract a fragment of a key from a keyhole using a wire. I want to ask the author about the method, did he try to do a similar trick himself?

Expert Locksmith Tampa says that theoretically, using a thin steel wire, you can remove the stuck part of the key, but this requires talent, which is achieved only in a minimal number of cases.

REMOVE THE BROKEN PART OF THE KEY BY DISASSEMBLING THE LOCK

There are reliable methods, but the speed of removing the damaged part will depend on your skills. Perhaps the surest way to solve this problem is to remove debris from the dismantled castle.

But there is a problem because you have to enter the room and open the door to access the lock case, often inaccessible.

A SELF-TAPPING SCREW WILL HELP YOU REMOVE THE KEY

You can quickly and efficiently pull the glued piece out of the keyhole using a drill with a fine drill and a self-tapping screw. The work is very delicate, worthy of the best jeweler. The task is to put the drill in the end of the stuck piece of the wrench, drill a hole in it and manage to screw a self-tapping screw. If you act carefully, this is very likely.

Do not rush to pull the self-tapping screw or twist it, trying to remove the part immediately. Instead, it is better to spray liquid WD-40 in the keyhole and gently shake the stuck part of the key. Only after 5-10 minutes of such “swinging” can you try, using pliers, very carefully to “fish” the fragment.

LET’S USE PLIERS

If part of the piece comes out of the keyhole, which is large enough to grip with pliers, round-nosed pliers, or, in extreme cases, sharpened tweezers, you should try to remove it using these tools. But, again, while doing this, do not repeat the mistakes of thousands of “aspiring craftsmen” who grabbed the piece with pliers, pulled it so hard and recklessly that they broke it again, exacerbating the problem.

Before you start “operating” the tool, you must lubricate the inside of the keyhole well and wait until the grease spreads, falling between the stuck debris and the walls of the secret mechanism, and only then make efforts to pull the broken part of the key. Proceed carefully. Then, the chances of success will be significantly greater.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button