CommunicationsComputers and TechnologyTech

When and Why You Need Cat6 Plenum Bare Copper Cable?

Cat6 Plenum Bare Copper Cable

Cat6 Plenum bare copper cable, often known as Cat6, is a popular choice for both residential and commercial applications. The Bulk Cat6 Plenum Cable comes with the best safety standards and other advantages. In this post, we’ll look into the uses, qualities, and standards of plenum Ethernet cable.

So, without further ado, let’s get to the point: why use Cat6 Plenum Cable in the first place?

How do you describe Cat6 Plenum Cable?

The 6th generation twisted pair cable is the Bulk Cat6 Plenum Cable. It is made up of eight copper conductors twisted in four pairs. Cat6 cable employs all eight conductors in order to provide exceptional performance. It is commonly used in residential networks, commercial networks, and data centres since it is backward compatible

Utilization of 1000ft of Cat6 Plenum: –

The cable was designed to be used in the building’s plenum areas. Plenum spaces are the components of a building that allow air to circulate for air conditioning and heating systems. They do it by allowing return airflows or conditioned/heated air to pass through at a pressure higher than the atmospheric limit.

Because plenum spaces are vulnerable to fire. The Cat6 plenum cables are use for their high-quality Polyvinyl Chloride (PVC). Their jackets are made of flame-resistant PVC and FEP insulation, which helps them give high-quality performance even in extreme temperatures. The PVC in Cat6 Plenum 1000ft emits less smoke and slows the spread of fire.

Specifications of Cat6 Plenum Cable: –

The Cat6 Bare Copper Plenum cable 1000ft, which replaces Cat5e, offers a massive data transfer rate of 10Gbps over a distance of 55 meters. It features a 550MHz extended bandwidth capacity, which reduces crosstalk and EMI. These properties aid in the transmission of strong signals across the network.

When the cable length is increase to 328 feet or 100 meters, the data transfer speed is equal to Cat5e, i.e. 1Gbps.

When it comes to the 8 conductors technology, they are either construct with pure copper or CCA (copper-clad aluminium); the former performs significantly better than the latter. So, if you don’t have any budget constraints, pure copper Ethernet connections are always the preferable option. Pure copper material is known as one of the best conductor materials that can carry signals to longer distances efficiently.

Temperatures ranging from 0 to 60 degrees Celsius are perfect to install the Bulk Cat6 Plenum Cable. The performance of the cable does not get affected under this temperature range by any means. It has a gauge range of 22AWG to 26AWG. They are usually pack in convenient EZ-pull box styles.

It can work in temperatures as low as -25 degrees Celsius and as high as 100 degrees Celsius without breaking down. The Bulk Cat6 Plenum Cable’s thick coating prevents both near-end and foreign crosstalk in your network. The cable is also UV resistant, which helps to strengthen your signal.

The above part describes why should we use the Cat6 plenum cable? The next part will describe where should we use the Cat6 plenum cable?

Where should you use Cat6 Plenum Cable?

They intend to install in plenum spaces of buildings because the risk of fire progression is higher in these places. It’s important to remember that you can’t utilize riser-rated or PVC-rated cable in plenum spaces. Riser-rated and PVC-rated Ethernet cables are not made of the same high-quality material as plenum cables. Plenum cables can be used in riser spaces and open-air regions for this reason, but they can’t be used anywhere else.

If you’re installing Cat6 plenum Ethernet cables in an area where EMI isn’t an issue, unshielded twisted pair cables are the way to go. Because there is no chance of interference, the signal quality will not affect by any means, and an additional layer of protection is not necessary.

If you’re going to use Cat6 cables in an EMI-prone location, shielded twisted pair cables are the way to go. The extra layer of protection comes in handy because there is a significant risk of EMI. Each of the four twisted pairs in STP Ethernet cables has an outside cover or shield. This eliminates all types of interference and ensures that your signal strength is not getting any damage or harm.

Why iTechCables?

We take pride in producing state-of-the-art Cat6 Plenum-rated and Cat6a Plenum Cable at iTechCables. We work with a wide range of clients, from individuals to huge organizations and data centres. Our customer base continues to expand at a quick rate as a result of our consistency in upholding contemporary standards.

We know our customer’s needs and requirements very well and we deliver according to them. Our satisfied and happy customers are our biggest assets. We are offering different types of after-sale services to our customers that increase our worth and value. Our free shipping services in some states of the US and lowest shipping rates for other customers work as icing on the cake.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
casino siteleri canlı casino siteleri
izmir escort